A13, A1203 and A1261

Heading east from London? Visiting the Docklands, Lakeside shopping centre or Southend Pier? Take Billy Bragg's advice, then, and hitch a ride on the A13 (and its westward pretenders, A1203 and A1261). But please don't confuse it. The poor thing is pretty muddled up as it is.

If you ever have to go to Shoeburyness
Take the A-road, the OK-road, that's the best
Go motoring on the A13

If you're looking for a thrill that's new
Take in Ford's, Dartford Tunnel and the river too
Go motoring on the A13

A13 Trunk Road to the Sea by Billy Bragg

There are nearly 30 miles of high-standard, mostly grade-separated and largely three-lane dual carriageway on the A13 route. But it hasn't the first idea what to do with them. A third of that distance is restricted to 40mph or less, for example. At its western end, the A13 peels off and completes the run into central London along congested urban streets, while the high-spec road continues parallel as the A1261 and then A1203, for no readily discernable reason. Despite the latter two being primary routes and by far the fastest way to The City, traffic is signposted off at every opportunity and encouraged to use the tedious old A13. The whole thing just makes no sense.

Half of the road is, truth be told, an embarassment to its managing authority. In 2000, Transport for London took control of all trunk roads within Greater London. Among them was the first 15 miles of A13 - but it came with a newly-let PFI contract whereby a private company was upgrading the road to a very high standard, contrary to TfL's traffic restraint policies. Unable to cancel the contract, TfL had to let the widening and grade-separation work go ahead. It's said that the tedious 30 and 40mph limits on their stretch of the road are an attempt to impose some of their thinking on what is effectively a brand new urban motorway. 40mph on a three-lane carriageway, downhill, without any frontage access, is slow enough to have anyone chewing on the steering wheel with frustration.

On the bright side, the gentle pace of the road gives the motorist ample opportunities to enjoy the incredible engineering on the way: the lengthy viaduct above the marshes near Dagenham; the elderly four-lane flyover at Ripple Road; and the Limehouse Link Tunnel. The latter is notable as being a road tunnel with a grade-separated junction inside it, and was the most expensive road ever built in the UK. Sadly it's the end of the line - it stops at a set of traffic lights. But then that's very much in character for this road.

You're not looking at the whole A13, A1203 and A1261

This page is about the parts of the A13, A1203 and A1261 that are designated a motorway or that have motorway characteristics. Other sections of this road will not be featured here and will not count towards the length of the road as shown below.

Start
Limehouse
End
Sadler's Farm
Passes
Blackwall Tunnel, Dagenham, Dartford Crossing, Tilbury, Basildon
Connects to
Length
29 miles

Exit list

Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(775) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image_formatter' -->
    <!-- BEGIN OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
      
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image' -->
    <!-- BEGIN OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    <img src="/sites/default/files/motorway/a13/130.gif" width="50" height="23" typeof="foaf:Image" />
    
    <!-- END OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    
    
    
    <!-- END OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
    
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(779) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image_formatter' -->
    <!-- BEGIN OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
      
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image' -->
    <!-- BEGIN OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    <img src="/sites/default/files/motorway/a/lilo-uc-e.gif" width="50" height="20" typeof="foaf:Image" />
    
    <!-- END OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    
    
    
    <!-- END OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
    
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(777) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image_formatter' -->
    <!-- BEGIN OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
      
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image' -->
    <!-- BEGIN OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    <img src="/sites/default/files/motorway/a/blank-e.gif" width="50" height="20" typeof="foaf:Image" />
    
    <!-- END OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    
    
    
    <!-- END OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
    
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(784) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image_formatter' -->
    <!-- BEGIN OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
      
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image' -->
    <!-- BEGIN OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    <img src="/sites/default/files/motorway/a/blank-e.gif" width="50" height="20" alt="" typeof="foaf:Image" />
    
    <!-- END OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    
    
    
    <!-- END OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
    
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(779) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image_formatter' -->
    <!-- BEGIN OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
      
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'image' -->
    <!-- BEGIN OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    <img src="/sites/default/files/motorway/a/lilo-uc-e.gif" width="50" height="20" typeof="foaf:Image" />
    
    <!-- END OUTPUT from 'themes/bootstrap/templates/system/image.html.twig' -->
    
    
    
    <!-- END OUTPUT from 'core/modules/image/templates/image-formatter.html.twig' -->
    
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Drupal\Core\Render\Markup(1)
  • contents
  • Available methods (4)
  • protected string -> string(233) " <!-- THEME DEBUG --> <!-- THEME HOOK: 'views_view_field' --> <!-- BEGIN OUTPUT …"
    
    <!-- THEME DEBUG -->
    <!-- THEME HOOK: 'views_view_field' -->
    <!-- BEGIN OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    <!-- END OUTPUT from 'core/modules/views/templates/views-view-field.html.twig' -->
    
    
  • public static create($string) -> string|\Drupal\Component\Render\MarkupInterface
    Creates a Markup object if necessary.
    
    If $string is equal to a blank string then it is not necessary to create a
    Markup object. If $string is an object that implements MarkupInterface it
    is returned unchanged.
    
    @param mixed $string
    The string to mark as safe. This value will be cast to a string.
    
    @return string|\Drupal\Component\Render\MarkupInterface
    A safe string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:32
    public __toString() -> string
    Returns the string version of the Markup object.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:51
    public count() -> int
    Returns the string length.
    
    @return int
    The length of the string.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:61
    public jsonSerialize() -> string
    Returns a representation of the object for use in JSON serialization.
    
    @return string
    The safe string content.
    
    Defined in .../core/lib/Drupal/Component/Render/MarkupTrait.php:71
Junction   Westbound               Eastbound  

Tower Hill
Wapping
A1203
Limehouse
The City
Rotherhithe Tunnel
(A13)






(A13)
N/A
LanesLanesLanesLanes SignsSigns LanesLanesLanesLanes Signs
0 miles, 2 lanes 0 miles, 2 lanes

A1206 A1206 Isle of Dogs
A1206
LanesLanesLanesLanes
0 miles, lanes 0 miles, 2 lanes

A1261 becomes A1203
The City (A13)
Mile End (A1205)
A1261
A1261
(A13)
(A1205)




A1203 becomes A1261
LanesLanesLanesLanesLanes Signs LanesLanesLanesLanesLanes Signs
0 miles, 3 lanes 0 miles, 3 lanes

Canary Wharf
Billingsgate Market
LanesLanesLanesLanesLanes Signs LanesLanesLanesLanesLanes Signs
0 miles, 3 lanes 0 miles, 3 lanes

Isle of Dogs
Canary Wharf
A1206


A1206
A1206
(A102)
Blackwall Tunnel (A102)
Isle of Dogs
Canary Wharf
A1206
LanesLanesLanesLanesLanes
LanesLanesLanesLanesLanesLanes
LanesLanesLanesLanesLanes
LanesLanesLanesLanesLanesLanes
0 miles, 4 lanes 0 miles, 4 lanes



A1020
(A13) City Airport
Royal Docks
A1020
LanesLanesLanesLanesLanesLanes Signs LanesLanesLanesLanesLanesLanes Signs
0 miles, 2 lanes 0 miles, 2 lanes

A13 becomes A1261
Blackwall Tunnel (A102)
The City A13
A13
(A102)



A1261 becomes A13
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, lanes

City Airport
Royal Docks
A1011 (A1020)
West Ham A1011
East Ham A124
A1011
(A1020)





A1011

A124





LanesLanesLanesLanesLanesLanesLanes
LanesLanesLanesLanesLanes Signs
LanesLanesLanesLanesLanesLanesLanes
LanesLanesLanesLanesLanes Signs
0 miles, 3 lanes 0 miles, 3 lanes

Forty Acre Lane
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 4 lanes

Local traffic only Local traffic only
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Plaistow
Stratford
Royal Docks
A112
A112


A112


Plaistow
Stratford
Royal Docks
A112
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Local traffic only
LanesLanesLanesLanesLanes
0 miles, lanes 0 miles, 3 lanes

East Ham
Beckton
A117
A117 A117 East Ham
Beckton
A117
LanesLanesLanesLanesLanesLanes LanesLanesLanesLanesLanesLanes
0 miles, 4 lanes 0 miles, 4 lanes

North Circular Road
Barking
Stansted Airport (M11 Link)
A406 Link
City Airport
Woolwich Ferry
A1020
A1020



A406
(M11)
North Circular Road
Barking
Stansted Airport (M11 Link)
A406 Link
City Airport
Woolwich Ferry
A1020
LanesLanesLanesLanesLanesLanes
LanesLanesLanesLanesLanes
LanesLanesLanesLanesLanesLanes
LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, lanes

River or canal Barking Creek River or canal Barking Creek
0 miles, lanes 0 miles, 3 lanes

Local traffic only Local traffic only
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Local traffic only
LanesLanesLanesLanesLanes
0 miles, lanes 0 miles, 3 lanes

Creekmouth
River Road Ind. Est.
Creekmouth
River Road Ind. Est.
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, lanes

Local traffic only
LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Barking
A123
Becontree
A1153
A123

A1153
Barking
A123
Becontree
A1153
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Renwick Ind. Est.
LanesLanesLanesLanesLanes SignsSigns Signs
0 miles, 3 lanes 0 miles, lanes

Becontree
Gale Street
LanesLanesLanesLanesLanes
0 miles, lanes 0 miles, 3 lanes

Dagenham
Hornchurch
A1306
Dagenham Dock
A1306 Dagenham
Hornchurch
A1306
Dagenham Dock
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Signs Signs
0 miles, 3 lanes 0 miles, 3 lanes

Dagenham CEME
Industrial Areas
Dagenham CEME
Industrial Areas
LanesLanesLanesLanesLanesLanes LanesLanesLanesLanesLanesLanes
0 miles, 4 lanes 0 miles, 4 lanes

Rainham
(B1335)
Ferry Lane Ind. Est.
(B1335) Rainham
(B1335)
Ferry Lane Ind. Est.
LanesLanesLanesLanesLanesLanes LanesLanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Rainham
Aveley
Purfleet
A1306
A1306 A1306 Rainham
Aveley
Purfleet
A1306
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes
M25 J30
The NORTH (M1 Link)
Stansted Airport (M11 Link)
Chelmsford (A12 Link)
M25 Link
Dartford Crossing
Channel Tunnel (M20 Link)
Gatwick Airport (M23 Link)
A282 Link
A1090
A282
A1090
M25 The NORTH (M1 Link)
Stansted Airport (M11 Link)
Chelmsford (A12 Link)
M25 Link
Dartford Crossing
Channel Tunnel (M20 Link)
Gatwick Airport (M23 Link)
A282 Link
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

A126 West Thurrock
Lakeside Shopping Cen.
Grays
A126
LanesLanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

West Thurrock
Lakeside Shopping Cen.
Grays
A1202
South Ockenden
Orsett
A1202


South Ockenden
Orsett
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes

Tilbury
A1089

A1089
Tilbury
A1089
LanesLanesLanesLanesLanes LanesLanesLanesLanesLanes
0 miles, 3 lanes 0 miles, 3 lanes